- CADCraft kitchen drafting uses the browser-based 2D toolset at getcadcraft.com.
- Core workflow: draw walls with Line, add fixtures with blocks, dimension everything, export DWG/DXF.
- Organization matters: separate walls, fixtures, annotation, and dimensions onto named layers.
- Command aliases like L, O, TR, and M keep a kitchen plan fast and repeatable.
- Output: use scaled layouts to print or export PDF/SVG for client review.
Why CADCraft Works Well for Kitchen Plans
A kitchen is one of the best practice projects in 2D CAD: small footprint, strict dimensional standards, and repeated fixture elements. CADCraft, an open-source CAD and BIM toolset accessible in the browser, gives you everything needed for this job — a command-line-driven workspace, layers, linetypes and lineweights, reusable blocks, layouts, and scaled printing.
Because CADCraft supports DWG and DXF file workflows, a kitchen plan you draft today can move into another CAD application later without a full redraw. That makes it a practical choice for architects, drafters, and detailers working on residential documentation.
Open the CADCraft browser entry point from the official site and confirm you can enter a command such as L for Line. Everything in this guide assumes the browser-based workspace.
The table below maps each stage of a kitchen project to the CADCraft capability that supports it.
| Kitchen Project Stage | CADCraft Capability | Why It Fits |
|---|---|---|
| Wall layout | 2D drafting, Line command | Fast, precise wall geometry |
| Counters and fixtures | Blocks | Repeated cabinets, sinks, appliances |
| Organization | Layers | Separate walls, fixtures, annotation |
| Documentation | Dimensions and linetypes | Clear measurements and hierarchy |
| Sheet output | Layouts and scaled printing | Print-ready plan sheets |
| File exchange | DWG/DXF support | Move drawings between CAD tools |
Set Up Layers Before You Draw
Professional kitchen documentation starts with layer discipline, not geometry. A clean layer structure keeps the plan editable and makes plotted output readable.
| Layer Name | Suggested Content | Typical Lineweight |
|---|---|---|
| A-WALL | Wall lines, openings | Heavy |
| A-FIXT | Cabinets, counters, sink, range | Medium |
| A-APPL | Refrigerator, dishwasher, hood | Medium |
| A-ANNO | Text labels, room names | Light |
| A-DIMS | All dimension strings | Light |
Do not place dimensions and fixtures on the same layer. Merged content is the most common reason kitchen plans become hard to edit and print correctly later.
Layer setup steps:
- Open the layer controls from within the drawing workspace.
- Create each layer from the table above before drawing any geometry.
- Assign a distinctive lineweight to walls so they read as the primary structure.
- Set the current layer to A-WALL before drawing your first line.
Draft the Kitchen: Step-by-Step
Follow this sequence to produce a standard kitchen floor plan. Each step uses commands available in the CADCraft command-line workflow.
Draw the Exterior Walls
Start the Line command (alias L). Pick a first point, then enter distances for each wall segment. Close the rectangle to complete the room outline. Use Offset (O) to create interior wall thickness from the exterior line.
Place Openings for Doors and Windows
Mark door and window locations on the wall layer, then use Trim (TR) to remove the wall segments inside each opening. Verify swing arcs and window widths against your project standards.
Lay Out Counters and Cabinets
Switch the current layer to A-FIXT. Use Offset to establish the counter depth along each wall, then draw cabinet runs. Where the same cabinet repeats, create a block and place copies with Copy (CO).
Position Appliances and the Sink
Draw or insert blocks for the range, refrigerator, dishwasher, and sink. Keep clearances consistent — a typical work aisle between counter runs should be dimensioned explicitly so the plan documents the workflow triangle.
Dimension the Plan
On layer A-DIMS, add dimension strings for overall room size, wall segments, and each opening. Select the required dimension type, pick the geometry, and place the dimension where it reads clearly.
Annotate and Review
Add labels such as room names and fixture notes on A-ANNO. Zoom in to inspect intersections, then use Extend (EX) or Trim to clean up any gaps or overlaps before exporting.
Before finalizing, confirm the sink, range, and refrigerator form a practical triangle with unobstructed legs. Dimension each leg so the layout decision is documented on the sheet.
Common Commands for Kitchen Drafting
These commands cover the majority of kitchen plan work. Enter the command name or its alias at the command line.
| Command | Alias | Category | Kitchen Use |
|---|---|---|---|
| Line | L | Drawing | Wall segments, counter edges |
| Circle | C | Drawing | Sink basins, corner details |
| Trim | TR | Modify | Openings in walls |
| Extend | EX | Modify | Closing gaps at intersections |
| Offset | O | Modify | Wall thickness, counter depth |
| Move | M | Modify | Repositioning fixtures |
| Copy | CO | Modify | Repeated cabinet blocks |
Press Enter to repeat the previous command. When placing a run of identical cabinets, alternate CO with Enter-repeat to keep the sequence fast.
Export and Print the Kitchen Plan
CADCraft's file workflow supports DWG and DXF for CAD exchange, plus PDF and SVG for output. Choose the format based on what happens next in your process.
| Format | Best For | Kitchen Project Example |
|---|---|---|
| DWG | Preserving structured CAD content | Handoff to a collaborating drafter |
| DXF | Data exchange between applications | Import into another CAD or CAM tool |
| Fixed-layout review copies | Client review and printing | |
| SVG | Scalable vector output | Web or graphic design use |
Output checklist:
- Confirm every layer holds only its intended content.
- Check that dimension text reads at a usable size in the layout.
- Set up a layout sheet at your intended plot scale before printing.
- Export a separate copy rather than overwriting your working file.
When working in the browser version, review your save or export action before closing the session. Export the revised result as a separate copy so the original drawing stays intact.
Kitchen Drafting Milestones
Kitchen Plan Milestones:
- All layers created and named before drawing
- Exterior and interior walls closed correctly
- Door and window openings trimmed to size
- Counter runs and fixture blocks placed
- Work triangle dimensioned on the plan
- Layout sheet set up with correct plot scale
- DWG or DXF copy exported for exchange
If you already use command-driven CAD, the transition is straightforward: CADCraft supports command aliases, layers, and layouts in patterns you recognize. Note that CADCraft is an independent application and should be learned as its own product, not as an Autodesk release.
FAQ
Q: Can I draft a kitchen plan in CADCraft without installing software?
Yes. CADCraft runs in the browser as its current access mode, so you can open the drawing workspace and start a kitchen plan directly from the official site. Desktop editions for macOS, Windows, and Linux are planned as development continues.
Q: Does a CADCraft kitchen plan support DWG files?
CADCraft's file workflow supports opening, editing, saving, and exporting DWG and DXF content. Use DWG when you need a standard CAD drawing format and DXF when interoperability is the priority.
Q: How do I keep repeated kitchen elements consistent?
Create a block for each repeated element such as a standard cabinet module or sink, then place copies with the Copy command. Blocks keep repeated content consistent and reduce redundant drafting.
Q: What is the fastest way to learn the CADCraft commands for kitchen drafting?
Start with the aliases L, O, TR, EX, M, and CO. These six commands cover walls, offsets, openings, and fixture placement for most kitchen plans. Practice on a small room before committing to a full plan set.