- CADCraft title block is the standardized information frame on a drawing sheet: project name, sheet number, scale, date, and author.
- Build it once as a reusable block so every layout in your project stays consistent.
- Use layers and lineweights to separate border, frame, text, and revision zones for clean printing.
- Layouts control output: set your sheet size and scale in the layout, not in model space.
- Export the finished sheet as PDF, DWG, or DXF through CADCraft's file workflow.
What Is a CADCraft Title Block?
A title block is the structured panel—usually along the bottom or right edge of a sheet—that identifies and documents a drawing. In CADCraft's 2D drafting and documentation workflow, the title block is the anchor that turns raw geometry into a legible, professional sheet ready for review, printing, or archiving.
A typical CADCraft title block captures these fields:
| Field | Purpose | Typical Content |
|---|---|---|
| Project / Drawing Title | Identifies the sheet | Project name, drawing name |
| Sheet Number | Orders the sheet set | A-101, E-02, S-3 |
| Scale | Ties model to paper | 1:50, 1/4" = 1'-0" |
| Date / Revision | Tracks versions | Issue date, Rev A, Rev B |
| Author / Checked By | Assigns responsibility | Drafter, engineer, reviewer |
| Company / Logo | Branding | Firm name, contact info |
| Units | Avoids misreading | mm, inches |
Keep every title block field editable but standardized. Consistent field placement across a sheet set lets reviewers find information in seconds, and it keeps your scaled printing output predictable.
Building the Title Block: Step-by-Step
Follow this workflow to create your first title block in the CADCraft drafting workspace. The process uses the same command-driven tools covered in the CADCraft beginner workflow: Line, Offset, Copy, and text annotation.
Draw the Sheet Border
Start the Line command (L) or use Offset (O) to construct an outer border and an inner frame. A common arrangement leaves a margin between the trim edge and the drawing frame. Use a dedicated BORDER layer with a heavier lineweight so the frame prints boldly.
Divide the Title Block Zones
Use Offset (O) and Trim (TR) to subdivide the panel into rows and cells: one wide zone for the drawing title, smaller stacked zones for sheet number, scale, date, and revision. Keep cell sizes uniform so text fits cleanly.
Add Labels and Field Text
Place static labels (SCALE, DATE, DRAWN BY) and field values using text annotation. Put labels on a lighter layer than values so updates never disturb the frame geometry.
Convert to a Reusable Block
Select the completed title block geometry and define it as a block. This keeps repeated sheet furniture consistent and reduces repetitive drafting work across every layout in the set.
Place It in a Layout
Insert the block into your sheet layout, verify it aligns with the frame, and confirm the layout's print scale matches the scale value written in the title block.
The most common drafting error is a title block that lists 1:50 while the layout is actually plotted at a different scale. Always verify the layout scale and the recorded scale value together before exporting to PDF.
Layer and Lineweight Setup
A clean title block depends on disciplined layer organization—one of CADCraft's core capabilities. Separate structural lines from annotation so edits stay isolated.
| Layer | Content | Lineweight | Notes |
|---|---|---|---|
| BORDER | Outer sheet trim edge | Heavy | Prints as the sheet edge |
| FRAME | Inner drawing frame | Medium | Bounds all drawing content |
| TITLE-BLOCK | Cell dividing lines | Light | Thin, uniform lines |
| TB-TEXT-LABEL | Static field labels | Light | Rarely edited |
| TB-TEXT-VALUE | Field values | Medium | Updated per sheet |
| REVISION | Revision rows | Light | Grows over time |
Layer-based organization makes complex 2D files easier to manage, edit, and review. When title block text sits on its own layer, you can freeze or restyle it without touching frame geometry—essential when exporting different deliverable versions.
Title Block Templates Compared
Different disciplines favor different title block arrangements. Pick the pattern that matches your deliverable:
Bottom Strip
- Horizontal band across sheet base
- Best for architectural sets
- Room for long project titles
- Familiar to most reviewers
Right Panel
- Vertical column on right edge
- Common in engineering drawings
- Stacks many compact fields
- Suits numbered sheet sets
Corner Block
- Compact block in one corner
- Maximizes drawing area
- Good for small utility sheets
- Fewer fields, minimal text
| Template | Best For | Fields Supported | Drawing Area Kept |
|---|---|---|---|
| Bottom Strip | Architecture plans | Many, wide | Good |
| Right Panel | Engineering sheets | Many, stacked | Good |
| Corner Block | Small utility drawings | Few | Excellent |
Whatever template you choose, build it as a block once and insert it into every layout. Reusable blocks keep repeated content consistent—exactly what CADCraft's blocks capability is designed for.
Quality Checklist Before Export
Run through this checklist every time you finalize a sheet in CADCraft's browser-based file workflow, then export your copy as DWG, DXF, or PDF.
Title Block Final Check:
- All title block fields filled: title, sheet number, scale, date
- Recorded scale matches the layout print scale
- Revision row updated with current issue
- Title block geometry on correct layers with correct lineweights
- Sheet exported as a separate copy, original file untouched
Export a fresh copy rather than overwriting the source drawing. The CADCraft file workflow treats the upload and the edited result as separate files, so download your revised sheet instead of assuming the original was updated.
FAQ
Q: Should I draw the CADCraft title block in model space or a layout?
Draw the title block in a layout (paper space) sheet environment. Layouts separate model content from plotted sheet arrangements, so your border, title block, and print scale stay independent of the model geometry.
Q: How do I keep a title block consistent across many sheets?
Build the title block once, convert it to a block, and insert it into every layout. Editing the block definition then propagates the change across all sheets that reference it.
Q: Can I open my existing title block drawings in CADCraft?
Yes. CADCraft supports a DWG and DXF file workflow for opening existing CAD drawings. After opening, check layers, linetypes, lineweights, blocks, and layout settings before continuing work.
Q: What scale should I write in the title block?
Write the scale at which the layout is printed, not the zoom level you used while drafting. Verify the layout's print scale first, then record the matching value in the title block.